Choose the Cloud Pro II when a 510 × 300 mm work area covers your products and the lower current acquisition cost leaves meaningful budget for extraction, materials, training, and customer acquisition. Choose the P2S when a 600 × 305 mm work area, dual 16MP cameras, or automatic passthrough will reliably save labor or unlock paid work.
The five differences that decide this comparison
| Decision factor | Gweike Cloud Pro II | xTool P2S |
|---|---|---|
| Laser source | 55W CO₂ glass tube | 55W CO₂ glass tube |
| Processing area | 510 × 300 mm | 600 × 305 mm |
| Maximum listed speed | 600 mm/s | 600 mm/s |
| Camera system | 5MP ultra-wide camera; manufacturer lists positioning error up to 2 mm | Dual 16MP cameras; manufacturer lists 0.3 mm close-range positioning precision |
| Long-material workflow | Bottom-feeding design is listed, but the product page does not document an equivalent automatic long-feed claim | Automatic passthrough; manufacturer says material can extend to 118 inches with the required setup |
| Rotary path | Current listing is sold with a rotary; listed diameter is 10–180 mm with risers | Rotary support requires the appropriate accessory and riser configuration |
| Machine dimensions | 970 × 565 × 234.5 mm | 1,000 × 639 × 268 mm |
| Machine weight | 45.6 kg | 45 kg |
| Observed manufacturer-page price | $1,659 sale listing; configuration dependent | $3,999 displayed listing; configuration dependent |
Price snapshot checked August 11, 2026. Sale pricing, packages, shipping, taxes, stock, and region can change. The merchant checkout is the final source.
Choose the Gweike Cloud Pro II when
- Your products fit comfortably inside 510 × 300 mm and do not depend on automatic long-stock feeding.
- You want LightBurn support and the current rotary-inclusive configuration.
- The acquisition-cost gap materially improves the complete setup—especially extraction, safe placement, materials, and working capital.
- You can tolerate a less mature independent evidence base while BeamBasis gathers owner support and reliability data.
Choose the xTool P2S when
- Your repeat products benefit from the approximately 90 mm wider processing area.
- Camera-guided placement on irregular stock or batch-fill workflow is important enough to value.
- Automatic passthrough will be used for paid signage or other long-stock work—not merely kept as a hypothetical feature.
- You place a higher value on xTool’s documented P2/P2S support ecosystem and can absorb the capital difference.
Important evidence gaps
A specification table cannot answer cut-edge quality, smoke leakage, camera calibration drift, chiller durability, support response, replacement-part lead time, or real batch throughput. BeamBasis will not award either machine a reliability or support winner until owner evidence or controlled testing supports it.
Gweike’s current product page also contains inconsistent autofocus labeling across its specification content. Treat autofocus behavior as a pre-purchase verification question rather than a deciding fact.
Who should buy neither?
- A buyer focused on deep bare-metal engraving should compare fiber or MOPA systems instead.
- A new seller without validated products should price outsourcing or makerspace access before tying up several thousand dollars.
- A workspace without a verified extraction route, suitable supervision, safe material policy, and fire plan is not ready for either machine.
- A buyer needing a larger production bed should compare the next size class rather than forcing work into a desktop chassis.
Complete-cost questions to answer before checkout
- Does the selected bundle contain the exact rotary, riser, filtration, and passthrough components your products require?
- Can the machine, lid, ducting, service clearance, and material path fit the actual room?
- What are the return, warranty, consumable, tube, chiller, and shipping terms for your region?
- Which electrical, extraction, fire-protection, and local compliance work remains outside the bundle?
- How many paid jobs are needed to recover the complete setup—not merely the machine price?
Primary sources
All decisive specifications above were rechecked against these sources on August 11, 2026.